null

Skid Plate, Aluminum with Hardware, Fits TT250

(14 reviews) Write a Review
$139.95
SKU:
CSC-1109
  • Visa
  • Master
  • Amex
  • Discover
  • Diners Club
  • JCB

Product Overview

Our new TT250 skid plate is a must for off-road riding. Fabricated from 0.200 inch thick billet aluminum and with a wrap-around design, it protects your vital engine parts from rocks and debris while out on the trail. It’s also shaped to allow for unobstructed oil changes. The complete kit includes the skid plate and all of the hardware needed for an install.

Reviews

(14 reviews) Write a Review

14 Reviews Hide Reviews Show Reviews

  • 5
    Skid plate

    Posted by Chase on Mar 8th 2023

    Quality well built product!

  • 4
    Skid plate

    Posted by Harry on Feb 6th 2023

    First off! I purchased this skid plate for my 02, Hawk 250.the quality of the TT250 Skid plate is first-class. No hardware for the top mount/engine plate. Was included with my order. You can't reuse the original bolt. You will need a 4” 5/16 bolt and nut also had to modify the hole location about a half inch. The bottom clamps fit perfectly oil drain location is great. Overall nice product. Very well pleased

  • 5
    SKID PLATE, ALUMINUM WITH HARDWARE

    Posted by Steven W on Jan 12th 2023

    The skid plate is made from solid aluminum. It looks great on the bike and is very functional. I think the skid plate fits several Chinese-made motorcycles with motors in the 150 - 250cc class. I installed it on a Lifan Xpect 200cc fits great.

  • 5
    TT250 Skid Plate for XPECT

    Posted by Steven W on Jan 10th 2023

    I bought the skid plate for a different motorcycle and it fit. I installed it on a Lifan Xpect. If fit the Xpect. Requires a longer engine mount bracket bolt.

  • 5
    Looks Great on My Hawk DLX

    Posted by bob lutke on Jan 4th 2023

    Perfect Fit. Better fit than I expected.

  • 5
    Skid plate

    Posted by Terry Goen on Dec 22nd 2022

    It was easy to install thanks to your video dept.Its very durable and looks great on my bike

  • 5
    Skid plate

    Posted by Sam on Sep 16th 2022

    I think it’s amazing, pretty easy to install, just remove two bolts from the frame, place it between the bolts, slide the bolt through and ur already half way, and the bottom pieces are even easier , just put them over the tubing of the frame next to the engine and tighten, very light weight and very strong, very reassuring to have out on the trails

  • 4
    Skid Install Instructions?

    Posted by Mark on Aug 29th 2022

    Looks like a simple instal, and it is, BUT...Installation Instructions would make it faster and safer. Installed on 2021 CSC TT250 so can't comment on other bike mfr. Not sure the torque rating so for engine mount bolt so went with 38ft-lbs. We tried installing on the top bolt, and on bottom bolt (decided on top bolt) of the engine bracket to see if we could get it to fit as show (flat) but neither position worked. At least for ours. That required use of washers or we could have bent the aluminum slightly to get it to fit (sorry no way to attach photos). Decided on the washers for now. We haven't put the skid to the test with a heavy hit but have no doubt will hold up and prevent damage.

  • 5
    Skid plate

    Posted by DAREK on Jul 1st 2022

    I have a bashan Brozz 230. Found out about this from a forum. Fits the Brozz exactly. The stock plate was not a wrap around type, and had taken some good hits, which I think we're a warning. I purchased this wrap around plate and it is AWESOME!

California Prop 65 Warning - This store sells products that contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. Contact CSC Motorcycles with any questions or concerns about the products you are purchasing. For more information www.p65warnings.ca.gov